treadmill repair and maintenance

If your looking for information and treadmill repair tips you have come to the right place.

Taking care of your electric treadmill should be of primary importance to ensure you prolong the life of the machine. The treadmill has many moving parts which means there are are many ways it can break down. You need to check your fitness exercise trainer on a regular basis to prevent long term damage.

Before you try and fix your machine ensure your read through the treadmill repair instructions carefully.The following guide provides a list of common treadmill repair scenarios you are likely to face.

Treadmill Belt Repair

The machines belt is one of the key moving components that takes the most wear and tear from your workouts.  Common problems with a worn belt is it begins to loose its traction and slip. In many cases the machine just grinds to a halt. The first thing to do is to unscrew the protective hood or cover. Check the belt and rollers. You may find a build up off grime that is clogging up between the inside of the running belt and the rollers which can affect the performance of the machine. Clean this off thoroughly. Check the belt for any wear and tear. If it looks fine then more than likely its the dust that is causing trouble. If the belt is old and worn remove it and replace it with a new belt.  

Slow performance

One of the main culprits that affect the performance of your home gym treadmill is the build up of dust and grime. Once they work there way into the moving parts like the motor and belt drive the effectiveness and performance of your exercise equipment will deteriorate over time. The build up of dust and grime, particularly when moving parts are involved gradually make those parts grind to halt. Therefore, when you are doing your treadmill workout and you hear those squeaking and creaking noises it is time to stop, switch it off and get your screwdriver ready to have a look inside. When you have unscrewed the cover remove the belt and give it a good wipe and clean. Take a vacuum and remove the access dust. Check the walking deck for wear and tear, you can tell by the the ruts or worn patches. You can either turn this over if it is well worn you need a replacement. Lubricate the deck every 4 to 6 months depending on how often you use it.

Remove dust the vacuum was unable to do especially around the motor.  Look for other moving parts such as  bearings and grease fittings. Clean and lubricate them. Check your treadmill repair manual to use the appropriate  lubrication.

Burning Smell

This usually signals a problem with the motor. This could be the result of a motor built with low quality components or just long term wear and tear. If you bought your machine recently check the warranty policy and contact the manufacturers customer service for a replacement. If it is an exerciser  that you have using for a long time you will have to buy a replacement or it may mean more financially viable to buy a new treadmill.

Treadmill Parts and Repair

How to repair a treadmill is not as hard as you think. You need to read the safety instructional first to become familiar with working components of the machine before you begin to fix it.